Sunday 27 July 2008

Playing with "moderns"...........

We collected Sam's new car last week. 07 plate Focus Zetec. My old Mondeo I'd had from new as a company car, then we bought it off the Leasing Company and Sam's been running that for the last 3 years. But, at 122k, it was starting to feel its age........... so we treated ourselves.

I have to say, I am immensly impressed with the Focus. Very roomy, nicely equiped and very comfy.
However, the Mondeo had a "manual-rear-parking-sensor", ......... aka A flippin' big towbar. The new one has an expensive looking rear bumper......... hmmm.

I put parking sensors on my Vectra last year and I have found them very useful so I went back to the same ebay shop and bought another set. £17.99 + p&p............... simple beep-beep ones. Ordered a dark grey rather than black.

The Focus has a grey panel in the rear bumper, and when I looked at a factory fit set (£450!!!!) they were set into this panel............ game on!

I ordered a new plastic panel (£12.05 from the Ford Dealer) and set about fitting them this afternoon.

Took about an hour......... easy peasy!

Ford assume each car will have parking sensors on, so the bumper behind this panel had cutouts already in for the sensors to fit in, there are holes with uncut grommets in behind each one for the wires....... even has the loom spliced by the reversing light ready to take the power feed off! Thanks Mr Ford........ made my life easy.


They even look like factory fit........... for £20 rather than £400!!



Well worth fitting to your "modern" bus.

The kit comes with everything you need, even the correct size hole-saw............ 4 sensors, control box, buzzer and the wiring loom you need.

http://cgi.ebay.co.uk/Rear-Car-Parking-Reversing-Sensors-4-Sensor-Buzzer-Kit_W0QQitemZ220259813174QQihZ012QQcategoryZ75330QQcmdZViewItemQQ_trksidZp1713.m153.l1262

2 comments:

mr.thex said...

nice car...is it ur car?

Craig Gingell said...

Hi Alan, I'm looking at doing this on a Focus C-Max. Why did you order a new plastic panel (£12.05 from the Ford Dealer) instead of just drilling the panel on the car, or am I missing something? Cheers Craig